README This data file is published by the Movebank Data Repository (www.datarepository.movebank.org). As of the time of publication, a version of the published animal tracking data set can be viewed on Movebank (www.movebank.org) in the study "Post-fledging movements of common mergansers (Mergus merganser) in Alaska (data from Pearce and Petersen 2009)" (Movebank Study ID 157278223). Individual attributes in the data files are defined below and in the Movebank Attribute Dictionary, available at www.movebank.org/node/2381. This data package includes the following data files: Post-fledging movements of common mergansers (Mergus merganser) in Alaska (data from Pearce and Petersen 2009).csv Post-fledging movements of common mergansers (Mergus merganser) in Alaska (data from Pearce and Petersen 2009)-reference-data.csv Post-fledging movements of common mergansers (Mergus merganser) in Alaska (data from Pearce and Petersen 2009)-raw-argos-diag.txt This file contains the raw DIAG-format data from Argos. Post-fledging movements of common mergansers (Mergus merganser) in Alaska (data from Pearce and Petersen 2009)-raw-argos-ds.txt This file contains the raw DS-format data from Argos. Post-fledging movements of common mergansers (Mergus merganser) in Alaska (data from Pearce and Petersen 2009)-sensor-messages.csv This file contains additional sensor data collected by the PTTs. These data are described in the following written publication: Pearce JM, Petersen MR (2009) Post-fledging movements of juvenile common mergansers (Mergus merganser) in Alaska as inferred by satellite telemetry. Waterbirds 32: 133–137. doi:10.1675/063.032.0116 Data package citation: Petersen MR, Douglas DC (YEAR) Data from: Post-fledging movements of juvenile common mergansers (Mergus merganser) in Alaska as inferred by satellite telemetry. Movebank Data Repository. doi:10.5441/001/1.3gc013f3 ----------- Terms of Use This data file is licensed by the Creative Commons Zero (CC0 1.0) license. The intent of this license is to facilitate the re-use of works. The Creative Commons Zero license is a "no rights reserved" license that allows copyright holders to opt out of copyright protections automatically extended by copyright and other laws, thus placing works in the public domain with as little legal restriction as possible. However, works published with this license must still be appropriately cited following professional and ethical standards for academic citation. We highly recommend that you contact the data creator if possible if you will be re-using or re-analyzing data in this file. Researchers will likely be interested in learning about new uses of their data, might also have important insights about how to properly analyze and interpret their data, and/or might have additional data they would be willing to contribute to your project. Feel free to contact us at support@movebank.org if you need assistance contacting data owners. See here for the full description of this license http://creativecommons.org/publicdomain/zero/1.0 ----------- Data Attributes These definitions come from the Movebank Attribute Dictionary, available at www.movebank.org/node/2381. algorithm marked outlier: Identifies events marked as outliers using a user-selected filter algorithm in Movebank. Outliers have the value TRUE. animal comments: Additional information about the animal that is not described by other reference data terms. example: sibling of #1423 THIS DATASET: The Douglas Argos Filter in Movebank was run in June 2016 using parameters similar to those used for Pearce and Petersen (2009). Settings are Filter Method = Best Hybrid; keep_lc = 1; maxredun = 10; Duplicate record treatment = offset by one sec.; MRD filter advanced parameters = not enabled; minrate = 80; r_only = not enabled; ratecoef = 15; xmigrate = 2; xoverrun = 1.5; xdirect = 20; xangle = 150; xpercent = 20; testp_0a = 2; testp_bz = 3; Best of Day filter = not enabled. Values in valid location manual were used by MP to improve the results of the filter. animal comments: Additional information about the animal that is not described by other reference data terms. example: sibling of #1423 THIS DATASET: Culmen measurements: The chord of the upper mandible length, measured medially from the bottom of the V-point (or U-point or the middle of the bill) where the integument meets the horny portion of the mandible to the distal tip of the bill nail (because of wear, not to the first feathers). Also described as culmen1 in Dzubin and Cooch (1992). Total tarsus measurements: The diagonal distance from the posterior junction of the tibiotarsus and tarsometarsus to the distal junction of the tarsometarsus at the base of the middle toe (Dzubin and Cooch 1992). Ninth primary: The total length of the feather from the insertion of the remige calamus at the skin surface to the distal end of the feather (with the ruler or divider placed between the 8th and 9th primaries) (Dzubin and Cooch 1992). Dzubin A and Cooch E (1992) Measurements of geese: General field methods. California Waterfowl Association, Sacramento, CA. animal death comments: Comments about the death of the animal. example: hit by a car animal ID: An individual identifier for the animal, provided by the data owner. This identifier can be a ring number, a name, the same as the associated tag ID, etc. If the data owner does not provide an Animal ID, an internal Movebank animal identifier may sometimes be shown. example: 91876A, Gary same as: individual-local-identifier THIS DATASET: Identifiers are USGS band numbers. animal mass: The mass of an the animal. example: 500 units: grams animal reproductive condition: The reproductive condition of the animal at the beginning of the deployment. example: non-reproductive, pregnant THIS DATASET: flightless = simultaneous molt of all primaries on the breeding grounds); with brood = on the breeding grounds, caring for chicks before chicks fledged. Argos altitude: Altitude used for location calculation, Argos DIAG format file (definition from Argos User's Manual 2011) example: 27 units: meters Argos best level: Best signal strength, Argos DIAG format file (definition from Argos User's Manual 2011). example: -117 units: decibels (dB) Argos calculated frequency: Calculated frequency, Argos DIAG format file (definition from Argos User's Manual 2011). example: 401.6732709 units: hertz (Hz) same as: Argos calcul freq Argos latitude 1: Solution 1. platform latitude in degrees and thousandths of degrees, Argos DIAG format file (definition from Argos User's Manual 2011). example: 19.493 units: decimal degrees, WGS84 reference system same as: Argos lat1 Argos latitude 2: Solution 2. platform latitude in degrees and thousandths of degrees, Argos DIAG format file (definition from Argos User's Manual 2011). example: 14.773 units: decimal degrees, WGS84 reference system same as: Argos lat2 Argos location class: The location class retrieved from Argos. Allowed values are 0, 1, 2, 3, A, B, and Z (definition from Argos User's Manual 2011). example: A units: none same as: Argos lc Argos longitude 1: Solution 1. platform longitude in degrees and thousandths of degrees, Argos DIAG format file (definition from Argos User's Manual 2011). example: 99.712 units: decimal degrees, WGS84 reference system same as: Argos lon1 Argos longitude 2: Solution 2. platform longitude in degrees and thousandths of degrees, Argos DIAG format file (definition from Argos User's Manual 2011). example: 120.286 units: decimal degrees, WGS84 reference system same as: Argos lon2 Argos Nmessages: The number of messages received [to calculate location], Argos DIAG format file (definition from Argos User's Manual 2011). example: 8 units: none same as: Argos nb mes Argos Nmessages 120: The number of messages received by the satellite at a signal strength greater than -120 decibels, Argos DIAG format file (definition from Argos User's Manual 2011). example: 2 units: none same as: Argos nb mes 120 Argos NOPC: The number of plausibility checks successful (from 0-4), Argos DIAG format file (definition from Argos User's Manual 2011). example: 3 units: none Argos pass duration: Time elapsed between the first and last message received by the satellite, Argos DIAG format file (definition from Argos User's Manual 2011). example: 118 units: seconds Argos quality indicator: This indicator gives information on the transmitter in terms of two digits, X and Y. X is the first digit and indicates residual error on the frequency calculation; Y is the second digit and indicates transmitter oscillator frequency drift between two satellite passes. Values provided in Argos DIAG format files (definition from Argos User's Manual 2011). Values obtained through some Argos channels do not include leading 0s, so 1-digit values indicate X = 0 and blank values or values of "0" indicate both X and Y = 0. Allowed values are X=0: No calculation of residual frequency error (fewer than four messages received) X=1,2,3: Unsatisfactory convergence of calculation X=4: Residual frequency error > 1.5 Hz X=5: 0.15 Hz < residual frequency error < 1.5 Hz X=6: Residual frequency error < 0.15 Hz Y=0: No check on transmit frequency drift, as the two results are more than 12 hours apart. Y=1: Frequency discrepancy > 400 Hz Probably due to transmit frequency discrepancy, change of oscillator, etc. Y=2: Previous location is less than 1/2 hour old. Frequency discrepancy > 30 Hz, i.e. F/F (over 10 min) >2.5 E-8 Y=3: Frequency drift > 4 Hz/minute, i.e. F/F (10 min) > 1.10-7 Y=4: Frequency drift < 4 Hz/minute, i.e. F/F (10 min) < 1.10-7 Y=5: Frequency drift < 2 Hz/minute, i.e. F/F (10 min) < 5.10-8 Y=6: Frequency drift < 1 Hz/minute, i.e. F/F (10 min) < 2.5 . 10-8 Y=7: Frequency drift < 0.4 Hz/minute, i.e. F/F (10 min) < 1.10-8 Y=8: Frequency drift < 0.2 Hz/minute, i.e. F/F (10 min) < 5.10-9 example: 68 units: none same as: Argos Iq Argos sensor 1: The value of the first Argos sensor, Argos DIAG format file (definition from Argos User's Manual 2011). example: 229 units: specific to the sensor Argos sensor 2: The value of the second Argos sensor, Argos DIAG format file (definition from Argos User's Manual 2011). example: 42 units: specific to the sensor Argos sensor 3: The value of the third Argos sensor, Argos DIAG format file (definition from Argos User's Manual 2011). example: 3 units: specific to the sensor Argos sensor 4: The value of the fourth Argos sensor, Argos DIAG format file (definition from Argos User's Manual 2011). example: 63 units: specific to the sensor Argos valid location manual: Indicates which of the two location estimates provided by Argos is the valid location as chosen by the user. Allowed values are 1: The user has chosen the primary location (solution 1, lat1/lon1) as the valid location. 2: The user has chosen the alternate location (solution 2, lat2/lon2) as the valid location. units: none attachment type: The way a tag is attached to an animal. Values are chosen from a controlled list: collar: The tag is attached by a collar around the animal's neck. glue: The tag is attached to the animal using glue. harness: The tag is attached to the animal using a harness. implant: The tag is placed under the skin of the an animal. tape: The tag is attached to the animal using tape. other: user specified deploy off timestamp: The timestamp when the tag deployment ended. example: 2009-10-01 12:00:00.000 format: yyyy-MM-dd HH:mm:ss.sss units: UTC (Coordinated Universal Time) or GPS time, which is a few leap seconds different from UTC same as: deploy off date deploy on latitude: The geographic latitude of the location where the animal was released (intended primarily for instances in which the animal release and tag retrieval locations have higher accuracy than those derived from sensor data). example: 27.3516 units: decimal degrees, WGS84 reference system deploy on longitude: The geographic longitude of the location where the animal was released (intended primarily for instances in which the animal release and tag retrieval locations have higher accuracy than those derived from sensor data). example: -97.3321 units: decimal degrees, WGS84 reference system deploy on timestamp: The timestamp when the tag deployment started. example: 2008-08-30 18:00:00.000 format: yyyy-MM-dd HH:mm:ss.sss units: UTC (Coordinated Universal Time) or GPS time, which is a few leap seconds different from UTC same as: deploy on date deployment comments: Additional information about the tag deployment that is not described by other reference data terms. example: This deployment was excluded from analysis because the tag failed. deployment end comments: a description of the end of a tag deployment, such as cause of mortality or notes on the removal and/or failure of tag. example: Data transmission stopped after 108 days. Cause unknown. THIS DATASET: Whether animal was dead or alive was determined primarily by the temperature sensor. deployment end type: A categorical classification of the tag deployment end. Values are chosen from a controlled list: captured: The tag remained on the animal but the animal was captured or confined. dead: The deployment ended with the death of the animal that was carrying the tag. equipment failure: The tag stopped working. fall off: The attachment of the tag to the animal failed, and it fell of accidentally. other released: The tag remained on the animal but the animal was released from captivity or confinement. removal: The tag was purposefully removed from the animal. unknown: The deployment ended by an unknown cause. deployment ID: A unique identifier for the deployment of a tag on animal, provided by the data owner. If the data owner does not provide a Deployment ID, an internal Movebank deployment identifier may sometimes be shown. example: Jane-Tag42 duty cycle: Remarks associated with the duty cycle of a tag during the deployment, describing the times it is on/off and the frequency at which it transmits or records data. example: it turns off during the night units: Any units should be defined in the remarks. event ID: An identifier for the set of information associated with each record or event in a data set. A unique event ID is assigned to every time-location or other time-measurement record in Movebank. example: 6340565 units: none latitude (decimal degree): The geographic longitude of a location along an animal track as estimated by the processed sensor data. Positive values are east of the Greenwich Meridian, negative values are west of it. example: -121.1761111 units: decimal degrees, WGS84 reference system same as: location lat life stage: The age class or life stage of the animal at the beginning of the deployment. Can be years or months of age or terms such as "adult", "subadult" and "juvenile". Units should be defined in the values (e.g. "2 years"). example: juvenile, adult units: Any units should be defined in the remarks. longitude (decimal degree): The geographic longitude of a location along an animal track as estimated by the processed sensor data. Positive values are east of the Greenwich Meridian, negative values are west of it. example: -121.1761111 units: decimal degrees, WGS84 reference system same as: location long manipulation type: The way in which the animal was manipulated during the deployment. Additional details about the manipulation can be provided using manipulation comments. Values are chosen from a controlled list: confined: The animal's movement was restricted to within a defined area. none: The animal received no treatment other than the tag attachment. relocated: The animal was released from a site other than the one at which it was captured. manipulated other: The animal was manipulated in some other way, such as a physiological manipulation. sensor type: The type of sensor with which data were collected. Values are chosen from a controlled list: acceleration: The sensor collects acceleration data. accessory measurements: The sensor collects accessory measurements, such as battery voltage. Argos Doppler shift: The sensor is using Argos Doppler shift for determining position. barometer: The sensor records air or water pressure. bird ring: The animal is identified by a ring that has a unique ID. GPS: The sensor uses GPS to find location and stores these. magnetometer: The sensor records the magnetic field. natural mark: The animal is identified by a natural marking. radio transmitter: The sensor is a classical radio transmitter. solar geolocator: The sensor collects light levels, which are used to determine position (for processed locations). solar geolocator raw: The sensor collects light levels, which are used to determine position (for raw light-level measurements). sex: The sex of the biological individual(s) represented in the Occurrence. Values are from a controlled list: m: male f: female study: The name of the study in Movebank in which data are stored. study site: The name of the deployment site, for example a field station or colony. example: Pickerel Island North tag ID: A unique identifier for the tag, provided by the data owner. If the data owner does not provide a tag ID, an internal Movebank tag identifier may sometimes be shown. example: 2342, ptt_4532 same as: tag local identifier tag manufacturer name: The company or person that produced the tag. example: Holohil same as: manufacturer tag mass: The mass of the tag. example: 24 units: grams tag model: The model of the tag. example: T61 same as: model tag readout method: The way the data are received from the tag. Values are chosen from a controlled list: satellite: Data are transferred via satellite. phone network: Data are transferred via a phone network, such as GSM or AMPS. other wireless: Data are transferred via another form of wireless data transfer, such as a VHF radio transmitter/receiver. tag retrieval: The tag must be physically retrieved in order to obtain the data. taxon: The scientific name of the species on which the tag was deployed, as defined by the Integrated Taxonomic Information System (ITIS, www.itis.gov). If the species name can not be provided, this should be the lowest level taxonomic rank that can be determined and that is used in the ITIS taxonomy. Additional information can be provided using the term taxon detail. example: Buteo swainsoni same as: species, animal taxon, individual taxon canonical name timestamp: The date and time a sensor measurement was taken. example: 2008-08-14 18:31:00.000 format: yyyy-MM-dd HH:mm:ss.sss units: UTC (Coordinated Universal Time) or GPS time, which is a few leap seconds different from UTC visible: Determines whether an event is visible on the Movebank Search map. Values are calculated automatically, with FALSE indicating that the event has been marked as an outlier by manually marked outlier or algorithm marked outlier. Allowed values are TRUE or FALSE. ----------- Data Attributes for Post-fledging movements of common mergansers (Mergus merganser) in Alaska (data from Pearce and Petersen 2009)-sensor-messages.csv These definitions are specific to this original data file from the author. animal: same as Animal ID, see above. sentype: sensor type. sentime: date and time in GMT, format ddMMMyy: hh:mm:ss. ptt: same as Tag ID, see above. sat: the Argos satellite identifier. freq: same as Argos calculated frequency, see above. spp: species of the animal. age: age of the animal. fate: bird's status at the time of last data transmission. sex: sex of the animal jd: year and Julian day, showing only the last digit of the year, format yddd, e.g. 5234 = 2005, 234th day of the year. jday: the Julian day of year. celcius: internal temperature of the animal as measured by the implanted tag, calculated as suggested by Microwave, Inc. from the value provided from ARGOS. voltage: battery voltage in V, calculated as suggested by Microwave, Inc. from the value provided from ARGOS. pcount: transmission count; increments by 1 with each message that is transmitted; rolls over to 0 after maximum number of bits allocated to the sensor is surpassed. ----------- More Information For more information about this repository, see www.movebank.org/node/15294, the FAQ at www.movebank.org/node/2220, or contact us at support@movebank.org.